Get a Quote
  • oring4

Standard O-Rings are available in 369 sizes as set up by the Aerospace Standard 568 published by the Society of Automotive Engineers. These sizes are designated by dash numbers shown on the 568 DASH Chart and are standardized by imperial dimensions. Standard O-Rings are specified by their inside diameter and cross section width. AS568 is the most commonly used standard in the U.S. for aerospace, automotive and general industrial applications. For more information, please see: Aerospace Standard 568 Dash Number, Comparison Properties Chart, PTFE Encapsulated O-rings, Material Shelf Life, and O-ring Groove Design Chart.

This elastomer possesses mechanical properties similar to Viton®, with the exception of its slightly lower compression set resistance. It is more suitable for sensitive applications where lighter compressive forces are applied to energize the seal. This core has a Shore A hardness of 70 but it also offers a broader operating temperature range of -80°F to +500°F. (-62°C to +260°C).

1 - 25 of 374 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  
Request Information Compare Items Search by Specification
Clear Filter

Inside Diamter (mm)

Inside Diamter (in)

Cross Section Width (in)

Cross Section Width (mm)

Item #

Inside Diamter

Cross Section Width

Durometer

Size Reference - AS568

Inside Diameter Tolerance +/-

Cross Section Tolerance +/-

001S70 N/A 0.74 mm0.029 in N/A 0.040 in1.02 mm N/A 70 N/A -001 N/A 0.004 in0.10 mm N/A 0.003 in0.08 mm
002S70 N/A 1.07 mm0.042 in N/A 0.050 in1.27 mm N/A 70 N/A -002 N/A 0.004 in0.10 mm N/A 0.003 in0.08 mm
003S70 N/A 1.42 mm0.056 in N/A 0.060 in1.52 mm N/A 70 N/A -003 N/A 0.004 in0.10 mm N/A 0.003 in0.08 mm
004S70 N/A 1.78 mm0.070 in N/A 0.070 in1.78 mm N/A 70 N/A -004 N/A 0.005 in0.12 mm N/A 0.003 in0.08 mm
005S70 N/A 2.57 mm0.101 in N/A 0.070 in1.78 mm N/A 70 N/A -005 N/A 0.005 in0.12 mm N/A 0.003 in0.08 mm
006S70 N/A 2.90 mm0.114 in N/A 0.070 in1.78 mm N/A 70 N/A -006 N/A 0.005 in0.12 mm N/A 0.003 in0.08 mm
007S70 N/A 3.68 mm0.145 in N/A 0.070 in1.78 mm N/A 70 N/A -007 N/A 0.005 in0.12 mm N/A 0.003 in0.08 mm
008S70 N/A 4.47 mm0.176 in N/A 0.070 in1.78 mm N/A 70 N/A -008 N/A 0.005 in0.12 mm N/A 0.003 in0.08 mm
009S70 N/A 5.28 mm0.208 in N/A 0.070 in1.78 mm N/A 70 N/A -009 N/A 0.005 in0.12 mm N/A 0.003 in0.08 mm
010S70 N/A 6.07 mm0.239 in N/A 0.070 in1.78 mm N/A 70 N/A -010 N/A 0.005 in0.12 mm N/A 0.003 in0.08 mm
011S70 N/A 7.65 mm0.300 in N/A 0.070 in1.78 mm N/A 70 N/A -011 N/A 0.005 in0.12 mm N/A 0.003 in0.08 mm
012S70 N/A 9.25 mm0.364 in N/A 0.070 in1.78 mm N/A 70 N/A -012 N/A 0.005 in0.12 mm N/A 0.003 in0.08 mm
013S70 N/A 10.82 mm0.426 in N/A 0.070 in1.78 mm N/A 70 N/A -013 N/A 0.005 in0.12 mm N/A 0.003 in0.08 mm
014S70 N/A 12.42 mm0.489 in N/A 0.070 in1.78 mm N/A 70 N/A -014 N/A 0.005 in0.12 mm N/A 0.003 in0.08 mm
015S70 N/A 14.00 mm0.551 in N/A 0.070 in1.78 mm N/A 70 N/A -015 N/A 0.007 in0.17 mm N/A 0.003 in0.08 mm
016S70 N/A 15.60 mm0.614 in N/A 0.070 in1.78 mm N/A 70 N/A -016 N/A 0.009 in0.22 mm N/A 0.003 in0.08 mm
017S70 N/A 17.17 mm0.676 in N/A 0.070 in1.78 mm N/A 70 N/A -017 N/A 0.009 in0.22 mm N/A 0.003 in0.08 mm
018S70 N/A 18.77 mm0.739 in N/A 0.070 in1.78 mm N/A 70 N/A -018 N/A 0.009 in0.22 mm N/A 0.003 in0.08 mm
019S70 N/A 20.35 mm0.801 in N/A 0.070 in1.78 mm N/A 70 N/A -019 N/A 0.009 in0.22 mm N/A 0.003 in0.08 mm
020S70 N/A 21.95 mm0.864 in N/A 0.070 in1.78 mm N/A 70 N/A -020 N/A 0.009 in0.22 mm N/A 0.003 in0.08 mm
021S70 N/A 23.52 mm0.926 in N/A 0.070 in1.78 mm N/A 70 N/A -021 N/A 0.009 in0.22 mm N/A 0.003 in0.08 mm
022S70 N/A 25.12 mm0.989 in N/A 0.070 in1.78 mm N/A 70 N/A -022 N/A 0.010 in0.25 mm N/A 0.003 in0.08 mm
023S70 N/A 26.70 mm1.051 in N/A 0.070 in1.78 mm N/A 70 N/A -023 N/A 0.010 in0.25 mm N/A 0.003 in0.08 mm
024S70 N/A 28.30 mm1.114 in N/A 0.070 in1.78 mm N/A 70 N/A -024 N/A 0.010 in0.25 mm N/A 0.003 in0.08 mm
025S70 N/A 29.87 mm1.176 in N/A 0.070 in1.78 mm N/A 70 N/A -025 N/A 0.011 in0.28 mm N/A 0.003 in0.08 mm
1 - 25 of 374 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  

Are you looking for a quote?

Get a Quote

Values Provider

Engineering Support

Over 150 years of combined knowledge for our customers

Material Solutions

A full complement of rubber, machined plastics and standard materials.

Customer Service

We are well known for our superior Customer Service

Quality Assurance

We are ISO 9001:2008 certified and have a customer base in many diverse industries

Our Products


Our Capabilities


Product Guides


Copyright © 2018 | Monroe Seals