British Standard O-Rings are very similar to Standard O-Rings in the fact that they are both standardized imperically. The British Standard however, incorporates some extended sizes in the 1/4" nominal cross section group for an even broader application range. British Standard O-Rings serve a variety of industries including aerospace, paint, food, and chemical transport. EP is also known as: Eythylene Propylene, EPR, EPDM, EPT, E.

EP is an elastomer which is characterized by wide range of applications and good chemical resistance. Ethylene propylene compounds have good resistance to detergents, alkalis, mild acids, greases, silicone oils, and alcohols.

1 - 25 of 463 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  
Clear Filter

Inside Diamter (in)

Inside Diamter (mm)

Cross Section Width (in)

Cross Section Width (mm)

Item #

Inside Diamter

Cross Section Width

Durometer

CSW Tolerance

BS Number

N/A 0.301 in7.65 mm N/A 0.064 in1.63 mm N/A 70 N/A 0.003 in0.08 mm N/A -903
N/A 0.239 in6.07 mm N/A 0.064 in1.63 mm N/A 70 N/A 0.003 in0.08 mm N/A -902
N/A 7.875 in200.03 mm N/A 0.275 in6.99 mm N/A 70 N/A 0.006 in0.15 mm N/A -886
N/A 7.625 in193.68 mm N/A 0.275 in6.99 mm N/A 70 N/A 0.006 in0.15 mm N/A -884
N/A 7.375 in187.33 mm N/A 0.275 in6.99 mm N/A 70 N/A 0.006 in0.15 mm N/A -882
N/A 7.125 in180.98 mm N/A 0.275 in6.99 mm N/A 70 N/A 0.006 in0.15 mm N/A -880
N/A 6.875 in174.63 mm N/A 0.275 in6.99 mm N/A 70 N/A 0.006 in0.15 mm N/A -878
N/A 6.625 in168.28 mm N/A 0.275 in6.99 mm N/A 70 N/A 0.006 in0.15 mm N/A -876
N/A 6.375 in161.93 mm N/A 0.275 in6.99 mm N/A 70 N/A 0.006 in0.15 mm N/A -874
N/A 6.125 in155.58 mm N/A 0.275 in6.99 mm N/A 70 N/A 0.006 in0.15 mm N/A -872
N/A 5.875 in149.23 mm N/A 0.210 in5.33 mm N/A 70 N/A 0.005 in0.13 mm N/A -870
N/A 5.75 in146.05 mm N/A 0.210 in5.33 mm N/A 70 N/A 0.005 in0.13 mm N/A -869
N/A 5.625 in142.88 mm N/A 0.210 in5.33 mm N/A 70 N/A 0.005 in0.13 mm N/A -868
N/A 5.5 in139.70 mm N/A 0.210 in5.33 mm N/A 70 N/A 0.005 in0.13 mm N/A -867
N/A 5.375 in136.53 mm N/A 0.210 in5.33 mm N/A 70 N/A 0.005 in0.13 mm N/A -866
N/A 5.25 in133.35 mm N/A 0.210 in5.33 mm N/A 70 N/A 0.005 in0.13 mm N/A -865
N/A 5.125 in130.18 mm N/A 0.210 in5.33 mm N/A 70 N/A 0.005 in0.13 mm N/A -864
N/A 5.000 in127.00 mm N/A 0.210 in5.33 mm N/A 70 N/A 0.005 in0.13 mm N/A -863
N/A 4.875 in123.83 mm N/A 0.210 in5.33 mm N/A 70 N/A 0.005 in0.13 mm N/A -862
N/A 4.75 in120.65 mm N/A 0.210 in5.33 mm N/A 70 N/A 0.005 in0.13 mm N/A -861
N/A 4.625 in117.48 mm N/A 0.210 in5.33 mm N/A 70 N/A 0.005 in0.13 mm N/A -860
N/A 2.937 in74.60 mm N/A 0.139 in3.53 mm N/A 70 N/A 0.004 in0.10 mm N/A -846
N/A 2.875 in73.03 mm N/A 0.139 in3.53 mm N/A 70 N/A 0.004 in0.10 mm N/A -845
N/A 2.813 in71.44 mm N/A 0.139 in3.53 mm N/A 70 N/A 0.004 in0.10 mm N/A -844
N/A 2.75 in69.85 mm N/A 0.139 in3.53 mm N/A 70 N/A 0.004 in0.10 mm N/A -843
1 - 25 of 463 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  

Are you looking for a quote?

Values Provider

Engineering Support

Over 150 years of combined knowledge for our customers

Material Solutions

A full complement of rubber, machined plastics and standard materials.

Customer Service

We are well known for our superior Customer Service

Quality Assurance

We are ISO 9001:2008 certified and have a customer base in many diverse industries